Best software for below-knee prosthetic socket design: A guide for O&P professionals
What should you look for in below-knee prosthetic socket design software, and how can digital technology improve the overall design process.
BENX O&P PLATFORM
11/13/202610 min read


Best software for below-knee prosthetic socket design: A guide for O&P professionals
The design of a below-knee (transtibial) prosthetic socket is one of the most critical aspects of successful prosthetic rehabilitation. The socket is the primary interface between the residual limb and the prosthesis. Its design directly influences comfort, stability, pressure distribution, suspension and the user's ability to perform everyday activities.
Traditionally, prosthetic socket design has relied on the clinical expertise of prosthetists, manual measurements, plaster casting, positive model modification and subsequent socket fabrication. These established methods have been refined over decades and continue to play an important role in prosthetic practice.
However, the prosthetics industry is gradually moving towards a more integrated digital approach. Advances in 3D scanning, computer-aided design (CAD), digital rectification and additive manufacturing are creating new possibilities for how prosthetic sockets are measured, designed, modified and manufactured.
This evolution is not about replacing the clinical knowledge and experience of a prosthetist. It is about extending those capabilities through digital tools that offer greater control over measurements, more consistent design modifications and a more efficient connection between clinical assessment and manufacturing.
Introduction
Understanding the traditional below-knee socket design process
Before exploring digital solutions, it is important to understand the established approach to transtibial socket design.
A conventional below-knee prosthetic socket workflow generally involves:
• Clinical assessment of the residual limb.
• Taking measurements and creating a plaster impression or cast.
• Preparing a positive plaster model.
• Performing manual rectification based on anatomical landmarks, tissue characteristics and clinical assessment.
• Fabricating a test socket and conducting fitting trials.
• Making necessary adjustments before final socket fabrication.
The success of this process depends considerably on the prosthetist's understanding of residual limb anatomy, tissue behaviour, pressure-tolerant areas and sensitive anatomical structures.
An experienced prosthetist develops the ability to interpret limb shape, identify areas requiring relief, determine appropriate loading zones and make modifications based on clinical observations.
The value of this expertise does not diminish with digital technology. In fact, it becomes even more important when translating clinical decisions into a digital design.
The opportunity lies in making the design process more measurable, repeatable and easier to modify without losing the clinical reasoning behind each decision.
Why prosthetic socket design is moving towards digital technology
Digital transformation is changing several aspects of healthcare and medical device manufacturing. Prosthetics and orthotics are also benefiting from these developments.
The shift towards digital prosthetic design is being driven by three important considerations.
1. Greater precision and measurement control
Manual measurements and plaster rectification depend on the accuracy of the measurement process and the experience of the professional performing the modifications.
Digital workflows introduce the ability to work with three-dimensional anatomical models and numerical measurements.
✓ Capture and retain the three-dimensional shape of the residual limb.
✓ Define anatomical landmarks on a digital model.
✓ Apply controlled dimensional and circumferential modifications.
✓ Review changes visually before fabrication.
✓ Maintain measurable design parameters for subsequent revisions.
This provides a more structured environment for socket design. Rather than relying entirely on visual estimation, the prosthetist can work with defined numerical inputs and inspect the resulting geometry.
It is important to recognise that digital precision begins with the quality of the original scan and measurement. A poorly captured limb will not become accurate simply because it is processed through CAD software.
2. Improved efficiency and easier modifications
One of the practical advantages of digital prosthetic design is the ability to make modifications without repeatedly recreating the physical model. In a conventional process, a significant design modification may require additional manual work on the positive model.
With digital socket design software:
✓ Design parameters can be adjusted without starting the process again.
✓ Multiple modifications can be reviewed on the same digital model.
✓ Previous design versions can be retained where the software supports version management.
✓ The digital model can be prepared for subsequent manufacturing.
This can reduce repetitive work and make the overall design process more efficient.
The time saved can be particularly valuable in clinics managing multiple patients and in manufacturing environments handling different socket designs.
3. Better integration with digital manufacturing
Perhaps the most significant long-term advantage is the ability to connect scanning, design and manufacturing.
When the residual limb is scanned and the socket is designed digitally, the resulting geometry can be prepared for additive manufacturing, including FDM and HP Multi Jet Fusion (MJF), subject to appropriate material and manufacturing requirements.
This creates an opportunity to connect the entire process rather than treating scanning, design and manufacturing as separate activities.
The result is a more connected digital manufacturing ecosystem for prosthetics.
What should you look for in below-knee prosthetic socket design software?
Not all CAD software is designed for prosthetic applications.
General-purpose 3D modelling tools can create complex geometries, but prosthetic socket design requires a combination of anatomical understanding, clinical modification capabilities and manufacturing considerations.
When evaluating below-knee prosthetic socket design software, O&P professionals should consider the following features.
1. 3D scanning and model compatibility
The starting point of digital socket design is obtaining an accurate three-dimensional representation of the residual limb.
A good software platform should support the import of commonly used 3D file formats, allowing professionals to work with scans captured through different scanning systems.
Common formats include:
• STL – widely used for 3D printing and surface geometry.
• OBJ – supports 3D geometry and associated surface information.
• PLY – commonly used for scanned 3D models and point-cloud-based data.
Compatibility with these formats gives clinics greater flexibility in selecting their scanning equipment.
2. Anatomical landmark identification
Anatomical landmarks are essential to below-knee socket design.
The prosthetist needs to identify relevant anatomical structures and understand how these relate to loading, relief and socket geometry.
Depending on the socket design approach, these may include:
• Patellar tendon region.
• Tibial crest and anterior tibia.
• Tibial tubercle.
• Fibular head.
• Distal tibial region.
• Popliteal region.
Digital software should make it possible to identify and work with these anatomical reference points on the three-dimensional model.
The purpose is not simply to mark points on a scan. It is to use these references to guide subsequent design modifications.
3. Controlled socket rectification
Rectification is one of the most important stages of below-knee socket design.
A prosthetist needs to make specific modifications based on the residual limb's anatomy, tissue characteristics and intended socket configuration.
A dedicated BK socket design platform should provide control over:
• Overall volume reduction.
• Circumferential reductions at defined levels.
• Localised modifications in specific anatomical regions.
• Relief and build-up requirements.
• Smooth transitions between modified and unmodified regions.
The ability to control these parameters numerically while observing the resulting 3D geometry can make the process more structured and reproducible.
4. Visualisation and design review
A digital model should not be treated as a collection of numerical values alone.
The prosthetist must be able to inspect the resulting socket geometry, rotate the model, examine different surfaces and understand how individual modifications affect the overall shape.
An effective interface should allow the professional to concentrate on the design rather than spend unnecessary time navigating complicated software controls.
5. Manufacturing readiness
The final design must be suitable for the intended manufacturing process.
A digital socket design platform should form part of a workflow that considers:
• Appropriate wall thickness.
• Structural requirements.
• Material selection.
• Manufacturing orientation and limitations.
• Compatibility with the intended fabrication technology.
The design and manufacturing stages should work together, rather than being treated as unrelated activities.
Digital versus Traditional prosthetic socket design
Traditional and digital approaches have different strengths. The objective should not be to declare one universally superior, but to understand how digital technology can extend the capabilities of established clinical practice.


How BenX simplifies below-knee prosthetic socket design
BenX is a dedicated digital design platform developed by BenGait Labs for prosthetics and orthotics professionals.
Its objective is to bring greater structure and control to the prosthetic design process, enabling professionals to move from conventional manual design activities towards a more connected digital workflow.
For below-knee socket design, BenX brings together 3D model handling, anatomical reference identification and structured rectification tools.
Working with 3D residual limb scans
BenX supports the import of 3D models in STL, OBJ and PLY formats.
This allows the prosthetist to work with digital residual limb models captured through compatible 3D scanning systems.
Instead of beginning with a physical positive model, the professional can work directly on the digital representation of the patient's limb.
Anatomical marking and reference points
The software provides a structured approach to identifying anatomical reference points on the residual limb.
These points provide the basis for subsequent rectification and help the prosthetist relate design modifications to relevant anatomical locations.
This is particularly important because socket design is not simply about reducing the overall volume of a model. It involves understanding where modifications are required and how they influence the final interface.
Structured rectification controls
BenX provides a structured approach to BK socket rectification through three principal modification categories:
1. Global reduction
This allows the prosthetist to define the overall volume reduction applied to the residual limb model.
2. Circumferential reduction
Circumference reduction can be defined at successive levels, including intervals of approximately 5 cm, allowing the professional to control the reduction profile along the residual limb.
3. Zonal modifications
Specific anatomical regions can be modified independently to accommodate the intended relief, build-up and other clinical adjustments.
These controls provide a more organised way of translating clinical decisions into digital geometry.
The prosthetist remains responsible for determining the appropriate modifications. BenX provides the digital environment in which these decisions can be implemented and reviewed.
Frequently Asked Questions (FAQs)
1. What is the best software for below-knee prosthetic socket design?
The best software depends on the clinical and manufacturing requirements of the O&P practice. A dedicated prosthetic design platform should support 3D model import, anatomical landmark identification, controlled socket rectification, visualisation and preparation for manufacturing. BenX is one such platform developed specifically for prosthetics and orthotics applications.
2. What is BK socket design software?
BK socket design software is a computer-aided design platform used to create and modify below-knee (transtibial) prosthetic sockets. It allows prosthetists to work with three-dimensional residual limb models, identify anatomical landmarks and apply the required modifications digitally.
3. What is the difference between transtibial and below-knee socket design?
Both terms refer to the same level of amputation. Transtibial is the clinical term for an amputation through the lower leg, while below-knee is the commonly used term. The design principles and software applications generally address the same prosthetic socket requirements.
4. Can 3D scanning replace plaster casting in prosthetic socket design?
3D scanning offers an alternative method of capturing residual limb geometry and can be integrated with digital socket design software. However, the choice of scanning or casting method depends on the clinical application, patient characteristics and the professional's workflow. Clinical assessment and fitting remain essential.
5. Can prosthetic sockets be designed using CAD software?
Yes. Dedicated CAD software allows prosthetists to work with 3D residual limb models, apply anatomical modifications and prepare digital socket designs for manufacturing. Purpose-built prosthetic CAD tools provide workflows that are more relevant to clinical socket design than generic 3D modelling applications.
6. Can digitally designed below-knee sockets be 3D printed?
Yes. Digitally designed sockets can be prepared for additive manufacturing using suitable technologies such as FDM and HP Multi Jet Fusion. Material selection, structural requirements, manufacturing parameters and clinical validation must all be considered before the socket is used.
7. Does digital socket design eliminate the need for prosthetist expertise?
No. Digital tools do not replace clinical expertise. The prosthetist must still assess the residual limb, identify anatomical structures, determine appropriate loading and relief areas, make design decisions and conduct clinical fitting. Digital technology provides additional tools to implement and review those decisions.
Conclusion: The next step in prosthetic socket design
Below-knee prosthetic socket design has always depended on the knowledge and experience of the prosthetist. Traditional techniques have established the clinical foundations of modern prosthetic practice, and their importance remains.
However, the growing adoption of 3D scanning, CAD-based rectification and additive manufacturing is creating opportunities to make the design and manufacturing process more precise, efficient and repeatable.
The transition to digital prosthetic design should not be viewed as a replacement of traditional expertise. It represents an opportunity to extend that expertise through better tools, measurable design parameters and integrated manufacturing workflows.
For O&P professionals looking to adopt this approach, dedicated software such as BenX provides a digital environment for below-knee prosthetic socket design, structured rectification and preparation for digital manufacturing.
The future of prosthetic design will belong to workflows that combine the clinical judgement of experienced prosthetists with the precision, flexibility and efficiency of digital technology.
Explore BenX and take the next step towards digital prosthetic socket design.
Visit: https://www.bengaitlabs.com/


From digital design to manufacturing
Once the socket design is completed, the digital model becomes the basis for the subsequent manufacturing process.
Depending on the selected manufacturing method, the design can be prepared for fabrication using technologies such as FDM or HP Multi Jet Fusion.
This provides a pathway towards connecting clinical assessment, digital design and additive manufacturing within a single broader workflow.
The future: An integrated scan-to-design-to-print workflow
The real opportunity in digital prosthetics lies beyond simply converting a plaster model into a 3D file.
It lies in connecting the different stages of prosthetic service delivery.
A connected digital workflow can be understood through three stages:
1. Scan – Capture the patient's anatomy
The residual limb is captured using a suitable 3D scanning method. The resulting model provides the digital reference for subsequent design.
2. Design – Apply clinical expertise digitally
The prosthetist identifies anatomical landmarks, evaluates the limb geometry and applies the required socket modifications using dedicated design software such as BenX.
3. Print – Manufacture the customised socket
The approved digital design is prepared for the selected manufacturing technology, enabling the production of a patient-specific prosthetic component.
✓ Digital models can provide a consistent reference for subsequent modifications.
✓ Design changes can be made without recreating the original physical model.
✓ Digital records can support communication between clinical and manufacturing teams.
✓ Additive manufacturing creates opportunities for customised fabrication.
This is the direction in which the prosthetics industry is evolving: a connected ecosystem where clinical assessment, digital design and manufacturing work together.
What does research tell us about digital prosthetic socket design?
Digital prosthetic design is not just a technological trend. Research is increasingly examining its clinical applications and potential benefits.
A particularly relevant study was published in Scientific Reports in October 2024.
Research: A clinical comparison of a digital versus conventional design methodology for transtibial prosthetic interfaces
Researchers evaluated a novel digital design framework against conventional prosthetic interface design.
The study involved eight individuals with transtibial amputation, representing nine residual limbs. The digital methodology used MRI or CT imaging and physics-based finite element analysis (FEA) to develop customised liner-socket interfaces.
The findings included:
• A statistically significant reduction in pain during walking with the digitally designed interfaces.
• Reduced pressure at the anterior distal tibial region during standing.
• Improved comfort ratings in certain anatomical regions.
• Positive participant feedback regarding the digital design approach.
The researchers also identified potential benefits in design time, repeatability and cost.
The study is particularly relevant because it demonstrates how digital design can be used to move beyond simple surface modelling towards more sophisticated patient-specific interface development.
It is important to clarify that this was a specific research methodology involving medical imaging and computational modelling, not an evaluation of BenX. Nevertheless, it provides encouraging clinical evidence for the broader direction of digital prosthetic interface design.
Read the research paper: A clinical comparison of a digital versus conventional design methodology for transtibial prosthetic interfaces – Scientific Reports, 2024
